OUR WORK PROCESS

INTRODUCTION

Before establishing a first collaboration, doubts arise about many aspects.

I will explain our work process to you.
Actually, everything is very natural and logical.

Since 1989, we have worked with very large and also small companies.
Most of them located in Spain but also in other countries.

Neither of these two events has been a problem.

After the budget has been approved and the first two payments have been made,
begins the process.

It basically consists of 4 steps:

  1. Provision of information
  2. Development of the work
  3. Revisions
  4. Delivery of the finished project.

1. PROVISION OF INFORMATION

This first phase is crucial for the successful development of the project.

Your collaboration is essential.
The better and more complete the information is, the simpler everything will be.
The probabilities of error are minimized and the final result will be much better.

We need you to provide us with the information according to very specific specifications.

The information must be provided in digital format.

Such information may be planimetric (P), photographic (PH) or descriptive (D).

We leave it up to you WHO should be the supplier of this information and the interlocutor for technical questions during the process.

It is an indispensable condition for meeting delivery dates that all such information be in our possession before the agreed date.

EXTERIOR

ENVIRONMENT
Description of materials, finishes, etc
Vegetation: types and location

BUILDINGS
Description of materials, finishes, etc
Finishing of each of the exterior walls
Exteriorflooring (terraces, entrance, terraces, etc.) Carpentry (doors, handles, sliding, hinged, skirting board, …)

INTERIOR

(for each of the rooms that you choose to visualize inside)

Interior furnishings*
(adaptation to our 3d libraries or custom modeling with extra budget )

Kitchens, appliances and sanitary ware Description of materials, finishes, etc.

Walls (painting, tiling, …) of each of the walls
Floors (materials, skirting, …)
Ceilings ( ceiling heights, coffered ceilings, curtain rails, …)
Interiorcarpentry (doors, handles, sliding doors, hinged doors, skirting, …)

* The exact furniture is subject to the availability of our bookstores.

2. DEVELOPMENT OF THE WORK

After approval of the budget and after providing the requested information, the work process begins.

Depending on the services contracted, the process is slightly different but, to give you an idea,
the generic process consists of these 4 steps:

1. We proceed to the study of the project. We will establish the scope of services.

2. In agreement with the client, we will define who will participate in the process. Normally they are: the architect, the developer and our team.
If any doubt arises, we will have a physical meeting or by videoconference with the interlocutor chosen by the client.

3. We start the 3D modeling of the project.

4. In the event that the project requires the recording of aerial images with a drone, this will be the time to perform them.

 

We have the possibility of recording the project site with a drone to later insert the project in 3D and give the impression that it has already been built.

These shots are especially recommended when the environment is one of the values of the project.

It requires a lot of technical and artistic effort but it is worth it.



3. revisions

The revisions are to work half as hard and not twice as hard.

It does not make sense for the changes requested to be capricious.

The usual process consists of these 3 steps:

1. First round of reviews.

We will provide the first images to check. Each time an image is uploaded, each participant will receive an email notifying them of the news. They can make comments that will be reflected in a log.

Second round of reviews.

We will continue working. In this second round, you will be able to check the textures and views. Collecting successive comments, we will get closer to the final result.

Third and final round of revisions. Final touches and last modifications.



4. CALCULATION, FINAL TOUCHES AND DELIVERY OF THE PROJECT

It is the last phase of the project but it is the one that makes the difference between a mediocre job and a brilliant one.
These last steps, which many companies skip, are necessary to achieve the optimum final result.

Changes are no longer possible. That is what the previous phases were for.
If, nevertheless, it is considered essential to carry them out, we will establish a new schedule and budget.

They are as follows:

1. Calculation of images (and/or video) in high resolution.

2. Post-production phase of the images (and/or video).

All sequences calculated by the computer are treated in post production to improve them. We work from color correction to, for example, the incorporation of landscapes or birds flying.

In the final editing, sound effects, music and all necessary adjustments are inserted.

If you want to go a step further, it is highly recommended to incorporate real video recordings that convey the essence of the project.

At the end of this video you will see some good examples.

This is the moment for the realization of photomontages in the case of still images.

Previously, the necessary photographs will have been taken to make the photomontages at different times of the day.

Once they fit together, as in the chaos of the video, the appropriate adjustments will be made to retouch the whole and simulate a perfect insertion of the computer-calculated image and the real photo.

IN SHORT...

You can rest assured.

We have been doing this all our lives.
We have refined the process day by day and continue to do so.

We will answer any questions you may have before or during the process.